SmartSolar MPPT 150/70-MC4

Victron Energy SmartSolar MPPT 150/70-MC4

Normal priceCHF 795.90
/
VAT included. Shipping costs
nicht auf Lager

Lieferzeit: Wenn nicht auf Lager ca. 2-3 Wochen

Beschreibung

A charge controller is the heart of every solar system and connects the solar panel to the battery. The voltage that changes over the course of the day is converted by the solar controller using high-performance technology into a voltage that is adapted to the loads or optimized for ideal and gentle battery charging.

Ultra-fast MPPT tracking

Especially under cloudy conditions when the light intensity is constantly changing, the super-fast MPPT algorithm improves energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers. Advanced maximum power point detection in partial shading. In the case of partial shading, there may be two or more maximum power points (MPP) on the current-voltage curve. Conventional MPPTs tend to settle on a local MPP. However, this may not be the optimal MPP. The innovative algorithm of the BlueSolar device will always maximize the energy yield by adjusting to the optimal MPP.

VE.Can: the solution for multiple controllers With VE.Can up to 25 controllers can be synchronized” “VE.Direct and VE.Can For a wired data connection with a Color Control GX, other GX products, a PC or other devices."

Highlight: Real-time display of data on the smartphone!

A Bluetooth-enabled smartphone can display a variety of data live. You can find more information and the dongle here in our shop

intelligent battery management with the BatteryLife algorithm

The BatteryLife algorithm monitors the state of charge of the battery and slightly increases the threshold value for switching off the load every day until the constant voltage is reached. From this point, the threshold for switching off the load is modulated so that the constant voltage is reached about once a week. The BatteryLife algorithm will increase the operational lifetime of the battery compared to traditional battery algorithms, which always switch between "partially charged" and "fully charged" (due to low self-discharge)

Internal temperature sensor

Of course, a temperature measuring unit is installed internally, so that constant and float voltages are compensated for by temperature. The full output current can be guaranteed up to 40°C.

Automatic battery voltage detection

The MPPT 100/50 will automatically adjust to a 12V,24V or 48V system.

Three-stage charging: Instead of simply charging constantly up to the charging voltage, an innovative stage system is used. (Constant current, constant voltage and charge retention phase.)



Spezifikationen

Beschreibung

A charge controller is the heart of every solar system and connects the solar panel to the battery. The voltage that changes over the course of the day is converted by the solar controller using high-performance technology into a voltage that is adapted to the loads or optimized for ideal and gentle battery charging.

Ultra-fast MPPT tracking

Especially under cloudy conditions when the light intensity is constantly changing, the super-fast MPPT algorithm improves energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers. Advanced maximum power point detection in partial shading. In the case of partial shading, there may be two or more maximum power points (MPP) on the current-voltage curve. Conventional MPPTs tend to settle on a local MPP. However, this may not be the optimal MPP. The innovative algorithm of the BlueSolar device will always maximize the energy yield by adjusting to the optimal MPP.

VE.Can: the solution for multiple controllers With VE.Can up to 25 controllers can be synchronized” “VE.Direct and VE.Can For a wired data connection with a Color Control GX, other GX products, a PC or other devices."

Highlight: Real-time display of data on the smartphone!

A Bluetooth-enabled smartphone can display a variety of data live. You can find more information and the dongle here in our shop

intelligent battery management with the BatteryLife algorithm

The BatteryLife algorithm monitors the state of charge of the battery and slightly increases the threshold value for switching off the load every day until the constant voltage is reached. From this point, the threshold for switching off the load is modulated so that the constant voltage is reached about once a week. The BatteryLife algorithm will increase the operational lifetime of the battery compared to traditional battery algorithms, which always switch between "partially charged" and "fully charged" (due to low self-discharge)

Internal temperature sensor

Of course, a temperature measuring unit is installed internally, so that constant and float voltages are compensated for by temperature. The full output current can be guaranteed up to 40°C.

Automatic battery voltage detection

The MPPT 100/50 will automatically adjust to a 12V,24V or 48V system.

Three-stage charging: Instead of simply charging constantly up to the charging voltage, an innovative stage system is used. (Constant current, constant voltage and charge retention phase.)



frequently asked Questions

Ideally, the LSD batteries have a lifespan of 15-20 years, but as we all know, the Power Stations are consumables, so the lifespan of them depends on the usage habits. However, we can promise that after the specified cycles (full charge and discharge), the devices will have 80% capacity left. The cycle times can support the customer for 5-6 years depending on the power station when used as described in the manual.

First, make sure your power station is connected to the EcoFlow app in internet mode. Second: Go to the Firmware section in the settings of the power station that you want to update. Check for the latest firmware and follow the steps to complete the upgrade.

That depends on the combined voltage and current of the solar panels you choose. It's fine as long as the solar panels use solar connectors and their combined voltage and current is between 10-150 volts and under 15 amps. For example, you can connect up to 3 x 400W solar panels to the Delta Pro (EU). You can find more information on our Energy Blog

When your portable power station is plugged into the wall outlet, all connected electronic devices are powered by the mains and not by the battery. If the power supply from the mains is interrupted, e.g. B. in the event of a power failure, the power plant automatically switches to battery power within 30 ms.

All Power Stations except Delta (EU) are compatible.

The EcoFlow Smart Generator is more intelligent than conventional generators. It works with the EcoFlow app so you can control and monitor it remotely. It features an LCD screen for when you're nearby, and you can even preset an automatic start when your Power Station is depleted to a certain level.

In contrast to other generators, the smart generator charges your power station directly with direct current. This results in approximately 10% higher efficiency, saving you time and money.

The Smart Generator was developed to complement the DELTA Pro or DELTA Max, but also works as a traditional gas generator when you need it on its own.

To bridge longer power outages, you can charge your DELTA Pro or Max with the Smart Generator. In this case, a full tank of fuel adds 5.4kWh to your ecosystem.

Portable solar panels are a highly effective, clean and renewable way to charge a portable power station. The EcoFlow 400W portable solar panels have higher wattage than typical solar panels and are more efficient due to their monocrystalline cells. You can string together up to three 400W portable solar panels and use them with a DELTA Pro Portable Power Station to achieve 1200W of power. In addition, the EcoFlow portable power supplies use an MPPT algorithm to ensure a constant power supply. Unlike static solar panels, portable solar panels can be easily moved and oriented in the sky depending on the position of the sun.